- Continue Shopping
- Your Cart is Empty
Aquacultured Coral and Frags
Assorted Beginner Acan Coral Frag Pack
$ 94.99
How to Care for Acanthanastrea Lordhowensis Coral
written by Dave Burr
Acan Lord is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium. Each polyp is approximately 1-1.5 cm across. Baby polyps will grow around the base of established polyps. Acan Lords are great beginner corals.
Placement: Mount the Acan Lord using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: Acan Lord Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Acan Lord Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Low to moderate
Aggressiveness: Peaceful
Range: Australia
Family: Mussidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Beginner Coral Pack
$ 44.99
How to Care for Beginner Corals
written by Dave Burr
Beginner Corals are selected because they are easy to keep and are a great choice for the beginning reef hobbyist. They will do well in an aquarium with moderate lighting & flow. The beginner corals we select are more tolerant to changes in water chemistry than most corals. The most important thing any hobbyist can do to create a flourishing reef aquarium is to maintain the water chemistry within the correct parameters. You’ll have more success & enjoyment from the reef aquarium hobby when you master your tanks chemistry!
Placement: Mount your beginner coral using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive moderate flow and light. If you do not want a specific coral growing on your your main rock structure, try creating an island by mounting them to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, beginner corals do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Beginner corals require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow beginner corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Aqua-cultured by Vivid Aquariums
Family: Misc
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Blastomussa Coral Frag Pack
$ 49.99
How to Care for Blastomussa Coral
written by Dave Burr
The Blastomussa Coral will bring a burst of color to any reef aquarium. They can sting nearby corals so leave a few inches between Blastomussa and other corals.
Placement: Mount the Blastomussa Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower third of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 1-2" around this coral so it is not stung by nearby corals.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mini mysis shrimp.
Lighting & Flow Requirements: The Blastomussa Coral requires moderate water flow and low to moderate lighting (PAR 120-200). T5's, Metal Halides, or LED's can all grow Red & Green Blastomussa Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 120-200)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Australia
Family: Blastomussa
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Chalice Coral Frag Pack
$ 119.99
How to Care for Chalice Coral Frags
written by Dave Burr
The corals in our assorted Chalice frag pack are easy to keep and grow well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the chalice corals using IC gel glue, or putty, on an exposed rock in the lower half of the aquarium where it will receive moderate flow and indirect light.
Feeding: Vivid Aquariums recommends feeding Chalice Corals with Oyster-Feast, Roti-Feast, and/or cyclopeeze. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Tentacles: Echinophyllia & Chalice Corals have sweeper tentacles that come out at night so leave several inches between them and surrounding corals.
Lighting & Flow Requirements:
Chalice requires moderate water flow and low to moderate lighting (PAR 80-250) to maintain its color. T5's, Metal Halides, or LED's can all grow Echinophyllia & Chalice Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo Pacific, Grown in California
Family: Assorted
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Encrusting Coral Frag Pack
$ 64.99
How to Care for Encrusting Coral Frags
written by Dave Burr
The corals in our assorted encrusting frag pack are easy to keep and grow well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the encrusting corals using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: Encrusting corals require moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia, Indo Pacific
Family: Assorted
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Goniopora Coral Frag Pack
$ 94.99
How to Care for Goniopora Coral Frags
written by Dave Burr
The corals in our Goniopora frag pack are fairly easy to keep and grow well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Goniopora Corals (aka Flowerpot Corals) will bring a burst of color and movement to any reef aquarium. They can sting nearby corals so leave a few inches between Gonioporas and other corals. Clownfish will often host Flowerpot Corals if there is no Anemone available. Flowerpot Corals make a good choice for reefs that house Angelfish since Angels rarely bother this species.
Placement: Mount the Goniopora Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mini mysis shrimp.
Lighting & Flow Requirements: Goniopora Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Purple Goniopora Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Fiji, Indo Pacific, Australia
Family: Poritidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Montipora Coral Frag Pack
$ 49.99
How to Care for Montipora Coral
written by Dave Burr
Aquaculture: Think of frags as montipora seeds. Fragments of montipora are mounted onto small stones and grown in aquariums. We grow and frag Green Apple Cap coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Montipora Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember that as it grows and plates out it will create more and more shade below it.
Feeding: Vivid Aquariums recommends feeding montipora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Montipora Coral requires moderate to high water flow and bright lighting (PAR 250-400) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy - great beginner SPS coral!
Lighting Requirements: Moderate to high (PAR 250-400)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora capricornus
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Premium Acan Coral Frag Pack
$ 139.99
How to Care for Acanthanastrea Lordhowensis Coral
written by Dave Burr
Acan Lord is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium. Each polyp is approximately 1-1.5 cm across. Baby polyps will grow around the base of established polyps. Acan Lords are great beginner corals.
Placement: Mount the Acan Lord using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: Acan Lord Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Acan Lord Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Low to moderate
Aggressiveness: Peaceful
Range: Australia
Family: Mussidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Bali Green Slimer Acropora Coral
$ 44.99
How to Care for Bali Green Slimer Acropora Coral
written by Dave Burr
Placement: Mount the Bali Green Slimer using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember this coral can grow big over time so place it near the halfway up in your aquarium to give it room to grow and branch out. Adding some Red Montipora Capricornus around it once its established can create a nice contrast.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Bali Green Slimer requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Bird of Paradise Coral
Sold Out - $ 34.99
How to Care for Bird of Paradise Coral
written by Dave Burr
Think of frags as seeds. Fragments of Bird of Paradise Coral are mounted onto small stones and grown in aquariums. We grow and frag the Bird of Paradise here at Vivid Aquariums. Frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Bird of Paradise Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Bird of Paradise Coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow Birdsnest Coral when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific
Family: Seriatopora sp.
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
JF Bling Bling Cyphastrea Coral
$ 49.99
How to Car for JF Bling Bling Cyphastrea Coral
written by Dave Burr
The JF Bling Bling Cyphastrea Coral is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the JF Bling Bling Cyphastrea Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The JF Bling Bling Cyphastrea Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Favites Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia, Indo Pacific
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
JF Spellbound Cyphastrea Coral
$ 49.99
How to Car for Meteor Shower Cyphastrea Coral
written by Dave Burr
The Spellbound Cyphastrea Coral is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Spellbound Cyphastrea Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Spellbound Cyphastrea Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Favites Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia, Indo Pacific
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Joker Cyphastrea Coral
$ 34.99
How to Car for Joker Cyphastrea Coral
written by Dave Burr
The Joker Cyphastrea Coral is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Joker Cyphastrea Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Joker Cyphastrea Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Favites Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia, Indo Pacific
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Mystic Sunset Montipora Coral
$ 24.99
How to Care for Mystic Sunset Montipora Coral
written by Dave Burr
Aquaculture: We grow and frag the Mystic Sunset Montipora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Mystic Sunset Montipora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Mystic Sunset Montipora will encrust the rock and makes a great accent coral. If you are worried about it "growing out of control" just mount your frag on a larger "grow out" rock 3"-6" in size that is easy to remove from the aquarium to frag. This method prevents encrusting montipora from covering your main rock structure if you don't want them to.
Feeding: Vivid Aquariums recommends feeding Mystic Sunset Montipora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Mystic Sunset Montipora requires moderate to high water flow and moderate to bright lighting (PAR 250-450) to maintain its color. T5's, Metal Halides, or LED's can all grow montipora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 250-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora tuberculosa
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Orange Crush Acan Echinata Coral
$ 49.99
How to Care for Orange Crush Acan Echinata Coral
written by Dave Burr
We began farming the Orange Crush Acan Echinata coral in 2009. It's bright orange coloration helps it stand out in any reef aquarium. Orange Crush Acan Echinata Corals have sweeper tentacles that come out at night so leave 3"- 4" inches between them and surrounding corals.
Placement: Mount the Orange Crush Acan Echinata Coral using IC gel glue, or putty, on an exposed rock in the lower half of the aquarium where it will receive moderate flow and indirect light.
Feeding: Vivid Aquariums recommends feeding Orange Crush Acan Echinata coral with Oyster-Feast, Roti-Feast, and/or cyclopeeze. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Orange Crush Acan Echinata coral requires moderate water flow and low to moderate lighting (PAR 120-250) to maintain its color. T5's, Metal Halides, or LED's can all grow Acan Echinata Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Aggressive - sweeper tentalces
Range: Indo Pacific, Grown in California
Family: Mussidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Purple Death Palythoa
Sold Out - $ 34.99
How to Care for Purple Death Palys
written by Dave Burr
Purple Death Palys are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Purple Death Palys using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Purple Death Palys require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Purple Rim Montipora Undata Coral
$ 39.99
How to Care for Purple Rim Montipora Undata Coral
written by Dave Burr
Placement: Mount the Purple Rim Montipora Undata using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Purple Rim Montipora Undata will encrust the rock and can plate out or grow into a bowl shape. It may eventually shade corals below it.
Feeding: Vivid Aquariums recommends feeding Purple Rim Montipora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Purple Rim Montipora Undata requires moderate to high water flow and moderate to bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora undata
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Red Death Palythoa Coral
$ 29.99
How to Care for Red Death Palys
written by Dave Burr
Red Death Palys are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Red Death Palys using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Red Death Palys require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
RR Tropic Thunder Montipora Coral
$ 34.99 $ 49.99
How to Care for RR Tropic Thunder Montipora Coral
written by Dave Burr
Placement: Mount the RR Tropic Thunder Montipora coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding montipora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The RR Tropic Thunder Montipora coral requires moderate to high water flow and moderate to bright lighting (PAR 250-350) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 250-350)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora setosa
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Season's Greetings Montipora Coral
$ 39.99
How to Care for Season's Greetings Montipora Coral
written by Dave Burr
Aquaculture: We grow and frag the Season's Greetings Montipora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Season's Greetings Montipora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. The Season's Greetings Montipora will encrust the rock and can grow into a bowl shape. It may eventually shade corals below it.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements:
The Season's Greetings Montipora requires moderate to high water flow and bright lighting (PAR 250-400) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy - great beginner SPS coral!
Lighting Requirements: Moderate to high (PAR 250-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora sp.
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
TGC Beauty and the Beast Palythoa Coral
$ 59.99
How to Care for Beauty and the Beast Palys
written by Dave Burr
Beauty and the Beast Palys are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Beauty and the Beast Palys using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Beauty and the Beast Palys require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid Purple Stylophora Coral
$ 34.99
How to Care for Vivid Purple Stylophora Coral
written by Dave Burr
Think of frags as seeds. Fragments of Vivid Purple Stylophora are mounted onto small stones and grown in aquariums. We grow the Vivid Purple Stylophora coral here at Vivid Aquariums in our 800 gallon reef aquarium. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Vivid Purple Stylophora coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding the Vivid Purple Stylophora coral with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements:
The Vivid Purple Stylophora coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow Vivid Purple Stylophora Coral when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: High
Aggressiveness: Peaceful
Range: Indo-Pacific
Family: Seriatopora sp.
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Video
Vivid's Blue Moon Echinophyllia Coral
$ 59.99
How to Care for Blue Moon Echinophyllia Coral
written by Dave Burr
The Blue Moon Echinophyllia will bring a good contrast to any reef aquarium as it encrusts over the rock.
Tentacles: Echinophyllia & Chalice Corals have sweeper tentacles that come out at night so leave several inches between them and surrounding corals.
Placement: Mount the Blue Moon Echinophyllia using IC gel glue, or putty, on an exposed rock in the lower half of the aquarium where it will receive moderate flow and indirect light.
Feeding: Vivid Aquariums recommends feeding Echinophyllia and Chalice Corals with Oyster-Feast, Roti-Feast, and/or cyclopeeze. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Blue Moon Echinophyllia requires moderate water flow and low to moderate lighting (PAR 80-250) to maintain its color. T5's, Metal Halides, or LED's can all grow Echinophyllia & Chalice Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo Pacific, Grown in California
Family: Pectiniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid's Grafted Montipora Capricornis Coral
Sold Out - $ 59.99
How to Care for Vivid's Grafted Cap Montipora Coral
written by Dave Burr
Aquaculture: Think of frags as montipora seeds. Fragments of montipora are mounted onto small stones and grown in aquariums. We grow and frag Vivid's Grafted Cap coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Vivid's Grafted Cap using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember that as it grows and plates out it will create more and more shade below it.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Vivid's Grafted Cap requires moderate to high water flow and bright lighting (PAR 250-400) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy - great beginner SPS coral!
Lighting Requirements: Moderate to high (PAR 250-400)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora capricornus
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid's Nitro Favia Coral
$ 69.99
How to Care for Vivid's Nitro Favia Coral
written by Dave Burr
The Nitro Favia is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Nitro Favia using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 1-2" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Nitro Favia Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Favia Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid's Strawberry Lemonade Cyphastrea Coral
Sold Out - $ 64.99
How to Care for Strawberry Lemonade Cyphastrea Coral
written by Dave Burr
The Strawberry Lemonade Cyphastrea Coral is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Strawberry Lemonade Cyphastrea Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Strawberry Lemonade Cyphastrea Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Favites Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia, Indo Pacific
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid's Toxic Cyphastrea Coral
$ 39.99
How to Car for Toxic Cyphastrea Coral
written by Dave Burr
The Toxic Cyphastrea Coral is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Toxic Cyphastrea Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Toxic Cyphastrea Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Favites Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia, Indo Pacific
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
WWC Bizarro Cyphastrea
Sold Out - $ 59.99
How to Care for Bizarro Cyphastrea Coral
written by Dave Burr
The Bizarro Cyphastrea Coral is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Bizarro Cyphastrea Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Bizarro Cyphastrea Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Favites Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia, Indo Pacific
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.