- Continue Shopping
- Your Cart is Empty
Summer Savings Sale 15% Off Sitewide code: 15OFF
Acropora Coral
Assorted Acropora Coral Frag Pack
$ 44.99
How to Care for Acropora Coral Frags
written by Dave Burr
We have thousands of colorful Acropora frags for sale here at Vivid Aquariums. When you purchase an Assorted Acropora Frag Pack you will receive a good variety of both color and species.
Placement: Mount the Acropora frag using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Acropora Coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Bali Green Slimer Acropora Coral
$ 49.99 $ 59.99
How to Care for Bali Green Slimer Acropora Coral
written by Dave Burr
Placement: Mount the Bali Green Slimer using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember this coral can grow big over time so place it near the halfway up in your aquarium to give it room to grow and branch out. Adding some Red Montipora Capricornus around it once its established can create a nice contrast.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Bali Green Slimer requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Electric Staghorn Acropora Coral
Sold Out - $ 49.99
How to Care for Electric Staghorn Acropora Coral
written by Dave Burr
Placement: Mount the Electric Staghorn Acropora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember this coral can grow big over time so place it near the halfway up in your aquarium to give it room to grow and branch out. Adding some Red Montipora Capricornus around it once its established can create a nice contrast.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Electric Staghorn Acropora requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow staghorn acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Hydnophora Coral
$ 24.99
How to Care for Green Hydnophora Coral
written by Dave Burr
Placement: Mount the Green Hydnophora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Leave 2-3 inches between it and other corals as it has a potent sting.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Green Hydnophora requires moderate to high water flow and bright lighting (PAR 250-350) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 250-350)
Water Flow: Moderate to high
Aggressiveness: Aggressive - leave 2-3 inches between it and other corals
Range: Indo-Pacific
Family: Merulinidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Oregon Blue Tort Acropora Coral
Sold Out - $ 149.99
How to Care for Oregon Blue Tort Acropora Coral
written by Dave Burr
Vivid's Oregon Blue Tort Acropora Coral prefers the upper section of the aquarium with a PAR of 350 - 450. We have been farming this coral for over a decade now and it is one one the original Acroporas that was fragged & traded in the hobby. Acroporas don't get more blue than this!Placement: Mount the Oregon Blue Tort Acropora Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding Oregon Blue Tort Acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Oregon Blue Tort Acropora requires moderate to high water flow and moderate lighting (PAR 350-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate (PAR 350-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
PC Rainbow Acropora Coral
Sold Out - $ 59.99
How to Care for PC Rainbow Acropora Coral
written by Dave Burr
PC Rainbow Acropora Coral prefers the middle to upper section of the aquarium with a PAR of 300 - 400. The Deep Red and Yellow Gold Base make this Acropora stand out.
Placement: Mount the PC Rainbow Acropora Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding PC Rainbow Acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The PC Rainbow Acropora requires moderate to high water flow and moderate lighting (PAR 250-350) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate (PAR 250-350)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Red Dragon Acropora Coral
Sold Out - $ 49.99
How to Care for Red Dragon Acropora Coral
written by Dave Burr
The Red Dragon Acropora Coral prefers the middle section of the aquarium with a PAR of 250 - 350. It is fast growing compared to most acropora and has a unique delicate structure. Its bright pink coloration makes it a real showpiece coral.
Placement: Mount the Red Dragon Acropora Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding Red Dragon Acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Red Dragon Acropora requires moderate to high water flow and moderate lighting (PAR 250-350) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate (PAR 250-350)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Red Planet Table Acropora
Sold Out - $ 69.99
How to Care for Red Planet Table Acropora Coral
written by Dave Burr
Placement: Mount the Red Planet Table Acropora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. This coral grows outward like a table. Give it space to "table out" and it will grow into a beautiful showpiece.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Red Planet Table Acropora requires moderate to high water flow and bright lighting (PAR 350-500) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 350-500)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Strawberry Shortcake Acropora Coral
Sold Out - $ 49.99
How to Care for Strawberry Shortcake Acropora Coral
written by Dave Burr
Think of frags as Acropora seeds. Fragments of acropora are mounted onto small stones and grown in aquariums. We grow and frag the Strawberry Shortcake Acropora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Strawberry Shortcake Acropora coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding Strawberry Shortcake Acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Strawberry Shortcake Acropora coral requires moderate to high water flow and bright lighting (PAR 350-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 350-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Toxic Table Acropora Coral
$ 59.99
How to Care for Toxic Table Acropora Coral
written by Dave Burr
Think of frags as Acropora seeds. Fragments of acropora are mounted onto small stones and grown in aquariums. We grow and frag the Toxic Table Acropora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Toxic Table Acropora coral using IC gel glue, or putty, on an exposed rock or ledge in the lower half of the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Toxic Table Acropora coral requires moderate to high water flow and bright lighting (PAR 350-500) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-400)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid Blue Tort Acropora Coral
$ 74.99
How to Care for Vivid Blue Tort Acropora Coral
written by Dave Burr
The Vivid Blue Tort Acropora coral stands out in any reef aquarium. We grow and frag the Blue Tort Acropora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Vivid Blue Tort Acropora coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding the Vivid Blue Tort Acropora coral with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Vivid Blue Tort Acropora coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid Tricolor Acropora Coral
$ 44.99
How to Care for Vivid Tricolor Acropora Coral
written by Dave Burr
Think of frags as Acropora seeds. Fragments of acropora are mounted onto small stones and grown in aquariums. We grow and frag the Vivid Tricolor Acropora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Vivid Tricolor Acropora coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Vivid Tricolor Acropora coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid's Confetti Acropora Coral
Sold Out - $ 279.99
How to Care for Vivid's Confetti Acropora Coral
written by Dave Burr
Placement: Mount Vivid's Confetti Acropora Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. This coral grows outward like a table. Give it space to "table out" and it will grow into a beautiful showpiece.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Vivid's Confetti Acropora Coral requires moderate to high water flow and bright lighting (PAR 300-400) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 350-500)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Vivid's Sonic Boom Acropora Coral
$ 69.99
How to Care for Vivid's Sonic Boom Acropora Coral
written by Dave Burr
Placement: Mount Vivid's Sonic Boom Acropora Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Vivid's Sonic Boom Acropora Coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.