- Continue Shopping
- Your Cart is Empty
Live Corals & Inverts
Alien Maze Brain Coral
$ 39.99
How to Care for Alien Maze Brain Coral
written by Dave Burr
Alien Maze Brain is easy to keep and grows well in most reef aquariums. They glow beautifully under actinic lighting. They do have sweeper tentacles that can extend 2"-4" at night and sting nearby corals.
Placement: Mount the Alien Maze Brain using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, or mysis shrimp when its tentacles are open.
Lighting & Flow Requirements: Alien Maze Brain Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Maze Brain Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo Pacific, Fiji
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Alien Moon Goniastrea Coral
$ 39.99
How to Care for Alien Moon Goniastrea Coral
written by Dave Burr
Alien Moon Goniastrea is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Alien Moon Goniastrea using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: Alien Moon Goniastrea Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Goniastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Australia
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Appleberry Montipora Coral
Sold Out - $ 49.99
How to Care for Appleberry Montipora Coral
written by Dave Burr
Aquaculture: We grow and frag the Appleberry Montipora coral here at Vivid Aquariums. It provides a brilliant addition to any reef aquarium.
Placement: Mount the Appleberry Montipora coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Sunset Montipora coral will encrust the rock and makes a great accent coral. If you are worried about it "growing out of control" just mount your frag on a larger "grow out" rock 3"-6" in size that is easy to remove from the aquarium to frag. This method prevents encrusting montipora coral from covering your main rock structure if you don't want them to.
Feeding: Vivid Aquariums recommends feeding montipora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Appleberry Montipora coral requires moderate to high water flow and moderate to bright lighting (PAR 250-450) to maintain its color. T5's, Metal Halides, or LED's can all grow montipora corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 250-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora sp.
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Armor of God Zoanthids
$ 19.99
How to Care for Armor of God Zoanthids
written by Dave Burr
Armor of God Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Armor of God Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Armor of God Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Acropora Coral Frag Pack
$ 44.99
How to Care for Acropora Coral Frags
written by Dave Burr
We have thousands of colorful Acropora frags for sale here at Vivid Aquariums. When you purchase an Assorted Acropora Frag Pack you will receive a good variety of both color and species.
Placement: Mount the Acropora frag using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Acropora Coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Beginner Coral Pack
$ 44.99
How to Care for Beginner Corals
written by Dave Burr
Beginner Corals are selected because they are easy to keep and are a great choice for the beginning reef hobbyist. They will do well in an aquarium with moderate lighting & flow. The beginner corals we select are more tolerant to changes in water chemistry than most corals. The most important thing any hobbyist can do to create a flourishing reef aquarium is to maintain the water chemistry within the correct parameters. You’ll have more success & enjoyment from the reef aquarium hobby when you master your tanks chemistry!
Placement: Mount your beginner coral using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive moderate flow and light. If you do not want a specific coral growing on your your main rock structure, try creating an island by mounting them to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, beginner corals do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Beginner corals require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow beginner corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Aqua-cultured by Vivid Aquariums
Family: Misc
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Blastomussa Coral Frag Pack
$ 49.99
How to Care for Blastomussa Coral
written by Dave Burr
The Blastomussa Coral will bring a burst of color to any reef aquarium. They can sting nearby corals so leave a few inches between Blastomussa and other corals.
Placement: Mount the Blastomussa Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower third of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 1-2" around this coral so it is not stung by nearby corals.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mini mysis shrimp.
Lighting & Flow Requirements: The Blastomussa Coral requires moderate water flow and low to moderate lighting (PAR 120-200). T5's, Metal Halides, or LED's can all grow Red & Green Blastomussa Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 120-200)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Australia
Family: Blastomussa
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Montipora Coral Frag Pack
$ 49.99
How to Care for Montipora Coral
written by Dave Burr
Aquaculture: Think of frags as montipora seeds. Fragments of montipora are mounted onto small stones and grown in aquariums. We grow and frag Green Apple Cap coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Montipora Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember that as it grows and plates out it will create more and more shade below it.
Feeding: Vivid Aquariums recommends feeding montipora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Montipora Coral requires moderate to high water flow and bright lighting (PAR 250-400) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy - great beginner SPS coral!
Lighting Requirements: Moderate to high (PAR 250-400)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora capricornus
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Assorted Zoanthid Coral Frag Packs
$ 39.99
How to Care for Zoanthids
written by Dave Burr
Please Note: You can choose how many frags you want your Zoanthid Frag Pack to include. The photo is a representative photo. You will receive a mixture of types and colors of zoanthids. Each frag will have 1-3 polyps depending on type of zoanthid. Vivid Aquariums will pick the pack for you based on our current inventory.
Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, Zoanthids do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palyhtoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Atomic Sympodium Coral
$ 39.99
How to Care for Atomic Sympodium Coral
written by Dave Burr
Atomic Sympodium will grow and encrust over the surrounding rocks.
Placement: Mount the Atomic Sympodium using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, and Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Atomic Sympodium require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Sympodium when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Moderate to high (PAR 200-300)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Fiji, Indo Pacific, Austraila
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Aussie Branching Hammer Coral
$ 39.99
How to Care for Aussie Branching Hammer Coral
written by Dave Burr
The Aussie Branching Hammer Coral is a great beginner coral and will sway back and forth to the currents in the aquarium. Hammer Corals are a favorite of many because of the sense of motion they bring to a reef tank.
Tentacles: They do have sweeper tentacles that can extend 2"-4" at night and sting nearby corals. Hammer Corals may be placed next to other Euphyllia species such as Frogspawn Coral and Hammer Coral as they do not sting other Euphyllia.
Placement: Mount the Aussie Branching Hammer Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mysis shrimp.
Lighting & Flow Requirements: The Aussie Branching Hammer Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Hammer Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Fiji, Indo Pacific, Australia, Solomon Islands
Family: Caryophyllidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Video
Aussie Hulk Lord Acan Coral
$ 34.99
How to Care for Aussie Hulk Lord Acan Coral
written by Dave Burr
Aussie Hulk Acan Lord is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium. Each polyp is approximately 1-1.5 cm across. Baby polyps will grow around the base of established polyps. Acan Lords are great beginner corals.
Placement: Mount the Aussie Hulk Acan Lord using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: Aussie Hulk Acan Lord Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Acan Lord Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Low to moderate
Aggressiveness: Peaceful
Range: Australia
Family: Mussidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Bad Hair Day Zoanthid Coral
$ 19.99
How to Care for Bad Hair Day Zoanthid Coral
written by Dave Burr
Bad Hair Day Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Bad Hair Day Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Bad Hair Day Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Bali Green Slimer Acropora Coral
$ 44.99
How to Care for Bali Green Slimer Acropora Coral
written by Dave Burr
Placement: Mount the Bali Green Slimer using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember this coral can grow big over time so place it near the halfway up in your aquarium to give it room to grow and branch out. Adding some Red Montipora Capricornus around it once its established can create a nice contrast.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Bali Green Slimer requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Bird of Paradise Coral
Sold Out - $ 34.99
How to Care for Bird of Paradise Coral
written by Dave Burr
Think of frags as seeds. Fragments of Bird of Paradise Coral are mounted onto small stones and grown in aquariums. We grow and frag the Bird of Paradise here at Vivid Aquariums. Frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Bird of Paradise Coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Bird of Paradise Coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow Birdsnest Coral when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific
Family: Seriatopora sp.
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Bleeding Apple Favia Coral
$ 49.99
How to Care for Bleeding Apple Favia Coral
written by Dave Burr
Placement: Mount the Bleeding Apple Favia using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 1-2" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Bleeding Apple Favia Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Favia Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Australia, Indo Pacific
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm The Twilight Favia coral is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Blue & Green Leptastrea Coral
$ 39.99
How to Care for Blue Eyed Leptastrea Coral
written by Dave Burr
Blue Eyed Leptastrea Coral is a unique coral that will stand out in any reef aquarium. It is easy to keep and will encrust over the rocks as it grows.
Placement: Mount the Blue Eyed Leptastrea Coral using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Blue Eyed Leptastrea Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Blue Eyed Blonde Zoanthids
$ 24.99
How to Care for Blue Eyed Blonde Zoanthids
written by Dave Burr
Blue Eyed Blonde Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Blue Eyed Blonde Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Blue Eyed Blonde Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Blue Green Leptoseris Coral
$ 44.99
How to Care for Blue Green Leptoseris Coral
written by Dave Burr
Placement: Mount the Blue Green Leptoseris Coral using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within the Jack-O-Lantern Leptoseris Coral supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Blue Green Leptoseris Coral requires moderate water flow and low to moderate lighting (PAR 120-220). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate (PAR 120-220)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Blue Hornet Zoanthids
$ 29.99
How to Care for Blue Hornet Zoanthids
written by Dave Burr
Blue Hornet Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Blue Hornet Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Blue Hornet Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Blue Leptastrea Coral
$ 39.99
How to Care for Blue Leptastrea Coral
written by Dave Burr
Blue is an uncommon color for corals, thus the Blue Leptastrea will stand out in any reef aquarium. It is easy to keep and will encrust over the rocks as it grows.
Placement: Mount the Blue Leptastrea using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Blue Leptastrea requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Blue Ricordea Mushrooms
Sold Out - $ 49.99
How to Care for Blue Ricordea Mushrooms
written by Dave Burr
Blue Ricordea Mushrooms are a great beginners coral and will glow beautifully under actinic lighting. They are sure to stand out in any reef aquarium.
Placement: Mount the Blue Ricordea Mushrooms using IC gel glue, or putty, in the bottom half of the aquarium where they can reproduce and expand their colonies over the rock. If you do not want them growing on your your main rock structure try creating a mushroom island by mounting several types of mushrooms to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of phytoplankton, zooplankton, and/or marine snow.
Lighting & Flow Requirements: Blue Ricordea Mushrooms require low to moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Orange Ricordea Mushrooms when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Low to moderate
Aggressiveness: Semi-aggressive
Range: Caribbean
Family: Ricordeidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help Ricordea Mushrooms grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Blue Snowflake Polyps
$ 49.99
How to Care for Blue Snowflake Polyps
written by Dave Burr
Blue Snowflake Polyps are easy to keep and are a great choice for the beginner. They will expand their colonies over the live rock.
Placement: Mount the Blue Snowflake Polyps using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure try creating an island by mounting them to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Blue Snowflake Polyps require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Clavularia when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Clavulariidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Blueberry Zoanthid Coral
Sold Out - $ 39.99
How to Care for Blueberry Zoanthid Coral
written by Dave Burr
Blueberry Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Blueberry Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Blueberry Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Captain America Palythoa
$ 39.99
How to Care for Captain America Palys
written by Dave Burr
Captain America Palys are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Captain America Palys using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Captain America Palys require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Chaetomorpha Macro Algae
Sold Out - $ 19.99
How to Care for Chaetomorpha Algae
written by Dave Burr
Aquaculture: We grow Chaetomorpha Macro Algae here at Vivid Aquariums by utilizing refugiums in our most important systems. Not only does it provide a natural way to keep Nitrates and Phosphates in check, it also provides a refuge for pods to safely reproduce.
Placement: Chaetomorpha Macro Algae does best housed in a refugium with moderate flow and good lighting. If you cannot provide enough flow to cause the Chaeto to tumble then you can manually turn it over every couple of days to prevent dead spots and die off.
Feeding: Chaetomorpha Macro Algae uses the combination of Nitrates, Phosphates and strong lighting to grow.
Lighting & Flow Requirements: We have found that Chaetomorpha Macro Algae does best under horticulture specific lights favoring red and blue channels. We grow our Chaetomorpha Macro Algae under Kessil H380 grow lights.
Care Level: Easy
Lighting Requirements: Moderate to high (PAR 150-300+)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Grown in California
Family: Chaetomorpha Spp.
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates >5 ppm, Phosphates, > .01 ppm
Water Chemistry: Continual production of nitrates and phosphates are required to keep Chaeto healthy and growing. Chaetomorpha Macro Algae will not do well in a system that already has 0 Nitrates and 0 Phosphates, but will thrive in systems with elevated levels.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Chili Pepper Montipora Coral
Sold Out - $ 39.99
How to Care for Chili Pepper Montipora Coral
written by Dave Burr
Placement: Mount the Chili Pepper Montipora coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Chili Pepper Montipora coral will encrust the rock and makes a great accent coral. If you are worried about it "growing out of control" just mount your frag on a larger "grow out" rock 3"-6" in size that is easy to remove from the aquarium to frag. This method prevents encrusting montipora coral from covering your main rock structure if you don't want them to.
Feeding: Vivid Aquariums recommends feeding montipora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Chili Pepper Montipora requires moderate to high water flow and moderate to bright lighting (PAR 250-450) to maintain its color. T5's, Metal Halides, or LED's can all grow montipora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 250-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora tuberculosa
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Convict Leptoseris Coral
$ 49.99
How to Care for Convict Leptoseris Coral
written by Dave Burr
Placement: Mount the Convict Leptoseris Coral using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within the Jack-O-Lantern Leptoseris Coral supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Convict Leptoseris Coral requires moderate water flow and low to moderate lighting (PAR 120-220). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate (PAR 120-220)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Cristata Torch Coral
$ 49.99
How to Care for Cristata Torch Coral
written by Dave Burr
Cristata Coral is a great beginner coral and will sway back and forth to the currents in the aquarium. Torch Corals are a favorite of many because of the sense of motion they bring to a reef tank.
Tentacles: Cristata Torch Corals do have sweeper tentacles that can extend 1/2"- 1" at night and can nearby corals. Cristata Torch Corals should be placed away from other Euphyllia species such as Frogspawn Coral and Hammer Coral as they could sting other Euphyllia Corals.
Placement: Mount the Cristata Torch Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mysis shrimp.
Lighting & Flow Requirements: The Cristata Torch Coral requires low to moderate water flow and low to moderate lighting (PAR 80 - 150). T5's, Metal Halides, or LED's can all grow Torch Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Fiji, Indo Pacific, Australia, Solomon Islands
Family: Caryophyllidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Darth Maul Porites Coral
$ 39.99
How to Care for Darth Maul Porites Coral
written by Dave Burr
Aquaculture: We grow and frag the Darth Maul Porites coral here at Vivid Aquariums. It prefers conditions similar to encrusting Montiporas such as the Superman Montipora.
Placement: Mount the Darth Maul Porites coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Darth Maul Porites coral will encrust the rock and makes a great accent coral. If you are worried about it "growing out of control" just mount your frag on a larger "grow out" rock 3"-6" in size that is easy to remove from the aquarium to frag. This method prevents encrusting montipora coral from covering your main rock structure if you don't want them to.
Feeding: Vivid Aquariums recommends feeding Porites corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Darth Maul Porites coral requires moderate to high water flow and moderate to bright lighting (PAR 250-450) to maintain its color. T5's, Metal Halides, or LED's can all grow montipora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 250-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora tuberculosa
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Devils Hand Leather Coral
Sold Out - $ 47.99
How to Care for Devils Hand Leather Coral
written by Dave Burr
Devils Hand Leather Corals take on bizarre shapes with numerous finger-like lobes protruding from the base of the coral. They are quite hardy and make great beginners corals.
Placement: Mount the Devils Hand Coral using IC gel glue, or putty, on an exposed rock or ledge in the middle third of the aquarium where they will receive moderate currents and moderate to high lighting. Leave a few inches around them and consider that they will often begin to shade corals around them as they grow larger.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do require supplemental feedings of phytoplankton and marine snow.
Lighting & Flow Requirements: The Devils Hand Leather requires moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Leather Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate to high (PAR 150-300)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Fiji, Indo Pacific
Family: Alcyoniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help the Yellow Devils Hand Leather grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Dragon Soul Prism Goniastrea Coral
$ 39.99
How to Care for Prism Goniastrea Coral
written by Dave Burr
Prism Goniastrea is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Prism Goniostrea using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: Prism Goniastrea Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Goniastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Australia
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Dragonfly Zoanthids
$ 19.99
How to Care for Zoanthids
written by Dave Burr
Dragonfly Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Dragonfly Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, Zoanthids do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Dragonfly Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palyhtoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Eagle Eye Zoanthids
$ 19.99
How to Care Eagle Eye Zoanthids
written by Dave Burr
Eagle Eye Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Eagle Eye Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, Eagle Eye Zoanthids do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Eagle Eye Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palyhtoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Electric Oompa Loompa Zoanthids
Sold Out - $ 19.99
How to Care for Electric Oompa LoompaZoanthids
written by Dave Burr
Electric Oompa Loompa Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Electric Oompa LoompaZoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Electric Oompa Loompa Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Electric Staghorn Acropora Coral
$ 49.99
How to Care for Electric Staghorn Acropora Coral
written by Dave Burr
Placement: Mount the Electric Staghorn Acropora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember this coral can grow big over time so place it near the halfway up in your aquarium to give it room to grow and branch out. Adding some Red Montipora Capricornus around it once its established can create a nice contrast.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Electric Staghorn Acropora requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow staghorn acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Fruit Loop Zoanthid coral
$ 29.99
How to Care Fruit Loop Zoanthids
written by Dave Burr
Fruit Loop Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Fruit Loop Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, Eagle Eye Zoanthids do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Fruit Loop Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palyhtoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Goblin's Fire Zoanthids
Sold Out - $ 29.99
How to Care for Goblin's Fire Zoanthids
written by Dave Burr
Goblin's Fire Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Goblin's Fire Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Goblin's Fire Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Gobstopper Zoanthid Coral
$ 29.99
How to Care for Gobstopper Zoanthids
written by Dave Burr
Gobstopper Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Gobstopper Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Gobstopper Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Golden Leptastrea Coral
$ 39.99
How to Care for Golden Leptastrea Coral
written by Dave Burr
Gold is an uncommon color for corals, thus the Golden Leptastrea will stand out in any reef aquarium. It is easy to keep and will encrust over the rocks as it grows.
Placement: Mount the Golden Leptastrea using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Golden Leptastrea requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Goldeneye Echinophyllia Coral
$ 44.99
How to Care for Goldeneye Echinophyllia Coral
The Goldeneye Echinophyllia will bring a good contrast to any reef aquarium as it encrusts over the rock.
Placement: Mount the Goldeneye Echinophyllia using IC gel glue, or putty, on an exposed rock in the lower half of the aquarium where it will receive moderate flow and indirect light.
Feeding: Vivid Aquariums recommends feeding Echinophyllia and Chalice Corals with Oyster-Feast, Roti-Feast, and/or cyclopeeze. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Tentacles: Echinophyllia & Chalice Corals have sweeper tentacles that come out at night so leave several inches between them and surrounding corals.
Lighting & Flow Requirements:
The Goldeneye Echinophyllia requires moderate water flow and low to moderate lighting (PAR 80-250) to maintain its color. T5's, Metal Halides, or LED's can all grow Echinophyllia & Chalice Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo Pacific, Grown in California
Family: Pectiniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Grandis Palythoa
$ 24.99
How to Care for Grandis Palythoa
written by Dave Burr
Grandis Palythoa Palys are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Grandis Palythoa using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Grandis Palythoa require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green & White Pipe Organ Coral
$ 39.99
How to Care for Green & White Pipe Organ Coral
written by Dave Burr
Although Green & White Pipe Organ Coral does have a red skeleton it is actually classified as a soft coral. It is often confused with Star Polyps. Unlike Star Polyps, it will not encrust the rocks and crowd out other coral species. It is a good coral to use to fill in gaps between other peaceful corals as it will not sting.
Placement: Mount the Green & White Pipe Organ using IC gel glue, or putty, on an exposed rock or ledge in the middle third of the aquarium where they will receive moderate currents and moderate to high lighting. Leave a few inches around them and consider that they will often begin to shade corals around them as they grow larger.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do require supplemental feedings of phytoplankton, zooplankton, and marine snow.
Lighting & Flow Requirements: The Green & White Pipe Organ Leather requires moderate water flow and low to moderate lighting (PAR 200-300). T5's, Metal Halides, or LED's can all grow Pipe Organ Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Moderate to high (PAR 200-300)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Fiji, Indo Pacific
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help the Green & White Pipe Organ grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Video
Green Apple Cap Montipora Coral
$ 39.99
How to Care for Green Apple Cap Montipora Coral
written by Dave Burr
Aquaculture: Think of frags as montipora seeds. Fragments of montipora are mounted onto small stones and grown in aquariums. We grow and frag Green Apple Cap coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Green Apple Cap using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember that as it grows and plates out it will create more and more shade below it.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Green Apple Cap requires moderate to high water flow and bright lighting (PAR 250-400) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy - great beginner SPS coral!
Lighting Requirements: Moderate to high (PAR 250-400)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora capricornus
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Bay Packer Zoanthids
$ 19.99
How to Care for Green Bay Packer Zoanthids
written by Dave Burr
Green Bay Packer Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Green Bay Packer Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Green Bay Packer Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Bullseye Mushrooms
$ 49.99
How to Care for Green Bullseye Mushrooms
written by Dave Burr
Green Bullseye Mushrooms are a classic beginner coral but will stand out in the nicest of reef tanks. They will grow well in most reef aquariums.
Placement: Mount the Green Bullseye Mushrooms using IC gel glue, or putty, in the bottom half of the aquarium where they can reproduce and expand their colonies over the rock. If you do not want them growing on your your main rock structure try creating a mushroom island by mounting several types of mushrooms to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of phytoplankton, zooplankton, and/or marine snow.
Lighting & Flow Requirements: Green Bullseye Mushrooms require low to moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Purple Bullseye Mushrooms when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Low to moderate
Aggressiveness: Semi-aggressive
Range: Fiji, Tonga
Family: Discosomatidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help Purple Bullseye Mushrooms grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Candy Cane Coral
$ 19.99
How to Care for Green Candy Cane Coral
written by Dave Burr
Green Candy Cane Coral is easy to keep, making it a great choice for beginners. This intense neon green variation provides a beautiful contrast to other corals in the aquarium. It is easy to frag as it grows out giving you the ability add spots of color throughout your reef.
Placement: Mount the Green Candy Cane coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis Kryptonite Candy Cane corals do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, or small mysis shrimp.
Lighting & Flow Requirements: Green Candy Cane Coral requires moderate water flow and low to moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Candy Cane Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Indo Pacific, Fiji
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Duncan Coral
$ 19.99 $ 29.99
How to Care for Green Duncan Coral
written by Dave Burr
Green Duncan Corals are easy to keep and grow well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Duncan Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive low to moderate currents and low to moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Green Duncan Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Leather Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Low to moderate
Aggressiveness: Peaceful
Range: Australia
Family: Dendrophylidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.