- Continue Shopping
- Your Cart is Empty
OCTOBER CORAL SALE 20% OFF ALL CORALS SITEWIDE code: OCT20
Live Corals & Inverts
Colt Coral
Sold Out - $ 69.99
How to Care for Colt Coral
written by Dave Burr
Colt Coral are fast growing and easy to keep in the home aquarium. They are easily distinguished from Leather Corals by their slimy texture which is similar to a wet bar of soap. They will sway back and forth in the currents beautifully as they filter food from the water.
Rinse: This coral will slime during shipping. Make sure to rinse it off in saltwater before placing it in your display aquarium.
Placement: Mount the the Colt Coral on an exposed rock in the bottom two-thirds of the aquarium. Leave several inches around the Colt Coral as it can sting and harm other corals it touches, especially Leather Corals
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do require supplemental feedings of phytoplankton and marine snow.
Lighting & Flow Requirements:
The Colt Coral requires moderate water flow and low to moderate lighting (PAR 150-300). T5's, Metal Halides, or LED's can all grow Colt Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-300)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Fiji, Indo Pacific
Family: Alcyoniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help the Colt Coral grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Video
Convict Leptoseris Coral
$ 49.99
How to Care for Convict Leptoseris Coral
written by Dave Burr
Placement: Mount the Convict Leptoseris Coral using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within the Jack-O-Lantern Leptoseris Coral supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Convict Leptoseris Coral requires moderate water flow and low to moderate lighting (PAR 120-220). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate (PAR 120-220)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Cristata Torch Coral
$ 59.99 $ 49.99
How to Care for Cristata Torch Coral
written by Dave Burr
Cristata Coral is a great beginner coral and will sway back and forth to the currents in the aquarium. Torch Corals are a favorite of many because of the sense of motion they bring to a reef tank.
Tentacles: Cristata Torch Corals do have sweeper tentacles that can extend 1/2"- 1" at night and can nearby corals. Cristata Torch Corals should be placed away from other Euphyllia species such as Frogspawn Coral and Hammer Coral as they could sting other Euphyllia Corals.
Placement: Mount the Cristata Torch Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mysis shrimp.
Lighting & Flow Requirements: The Cristata Torch Coral requires low to moderate water flow and low to moderate lighting (PAR 80 - 150). T5's, Metal Halides, or LED's can all grow Torch Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Fiji, Indo Pacific, Australia, Solomon Islands
Family: Caryophyllidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Darth Maul Favia Coral
Sold Out - $ 79.99
How to Care for Darth Maul Favia Coral
written by Dave Burr
The Darth Maul Favia is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Darth Maul Favia using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 1-2" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Darth Maul Favia Coral requires moderate water flow and low to moderate lighting (PAR 100-220). T5's, Metal Halides, or LED's can all grow Favia Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-220)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo Pacific, Grown in California
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Darth Maul Porites Coral
$ 49.99
How to Care for Darth Maul Porites Coral
written by Dave Burr
Aquaculture: We grow and frag the Darth Maul Porites coral here at Vivid Aquariums. It prefers conditions similar to encrusting Montiporas such as the Superman Montipora.
Placement: Mount the Darth Maul Porites coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Darth Maul Porites coral will encrust the rock and makes a great accent coral. If you are worried about it "growing out of control" just mount your frag on a larger "grow out" rock 3"-6" in size that is easy to remove from the aquarium to frag. This method prevents encrusting montipora coral from covering your main rock structure if you don't want them to.
Feeding: Vivid Aquariums recommends feeding Porites corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Darth Maul Porites coral requires moderate to high water flow and moderate to bright lighting (PAR 250-450) to maintain its color. T5's, Metal Halides, or LED's can all grow montipora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 250-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora tuberculosa
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Devils Hand Leather Coral
Sold Out - $ 47.99
How to Care for Devils Hand Leather Coral
written by Dave Burr
Devils Hand Leather Corals take on bizarre shapes with numerous finger-like lobes protruding from the base of the coral. They are quite hardy and make great beginners corals.
Placement: Mount the Devils Hand Coral using IC gel glue, or putty, on an exposed rock or ledge in the middle third of the aquarium where they will receive moderate currents and moderate to high lighting. Leave a few inches around them and consider that they will often begin to shade corals around them as they grow larger.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do require supplemental feedings of phytoplankton and marine snow.
Lighting & Flow Requirements: The Devils Hand Leather requires moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Leather Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate to high (PAR 150-300)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Fiji, Indo Pacific
Family: Alcyoniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help the Yellow Devils Hand Leather grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Dinosaur Egg Montipora Coral
Sold Out - $ 39.99
How to Care for Dinosaur Egg Montipora Coral
written by Dave Burr
Aquaculture: We grow and frag the Dinosaur Egg Montipora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Dinosaur Egg Montipora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Montipora Undata will encrust the rock and can plate out or grow into a bowl shape. It may eventually shade corals below it.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Dinosaur Egg Montipora requires moderate to high water flow and moderate to bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora sp.
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Dragon Soul Prism Goniastrea Coral
$ 24.99 $ 24.99
How to Care for Prism Goniastrea Coral
written by Dave Burr
Prism Goniastrea is easy to keep and grows well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Prism Goniostrea using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: Prism Goniastrea Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Goniastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Australia
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Dragonfly Zoanthids
$ 19.99
How to Care for Zoanthids
written by Dave Burr
Dragonfly Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Dragonfly Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, Zoanthids do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Dragonfly Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palyhtoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Eagle Eye Zoanthids
$ 19.99
How to Care Eagle Eye Zoanthids
written by Dave Burr
Eagle Eye Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Eagle Eye Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, Eagle Eye Zoanthids do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Eagle Eye Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palyhtoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Electric Staghorn Acropora Coral
Sold Out - $ 79.99
How to Care for Electric Staghorn Acropora Coral
written by Dave Burr
Placement: Mount the Electric Staghorn Acropora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember this coral can grow big over time so place it near the halfway up in your aquarium to give it room to grow and branch out. Adding some Montipora Capricornus around it once its established can create a nice contrast.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Electric Staghorn Acropora requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow staghorn acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Eye of Sauron Zoanthids
$ 24.99 $ 24.99
How to Care for Eye of Sauron Zoanthids
written by Dave Burr
Eye of Sauron Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Eye of Sauron Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Eye of Sauron Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Fear Factory Zoanthid Coral
$ 49.99
How to Care for Fear Factory Zoanthid Coral
written by Dave Burr
Fear Factory Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Fear Factory Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Fear Factory Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Fiji Yellow Leather Coral
$ 99.99
How to Care for Fiji Yellow Leather Coral
written by Dave Burr
Smaller Fiji Yellow Leather Corals are shaped like a mushroom, however as they grow larger they will take on an interesting folded appearance. When fully open, the tops of these Fiji Yellow Leather Corals are covered with numerous polyps about 1 cm in length.
Shedding: As with most leather corals they may go through periods when their polyps do not extend. They may shrink and shed some of their outer skin. Do not be alarmed if this should occur as it is a natural process that they go through. Fiji Yellow Leather Corals may remain closed for several days at a time but will reopen bigger and more beautiful than ever.
Placement: Mount the Fiji Yellow Leather Coral using IC gel glue, or putty, on an exposed rock or ledge in the middle third of the aquarium where they will receive moderate currents and moderate to high lighting. Leave a few inches around them and consider that they will often begin to shade corals around them as they grow larger.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis Toadstool Leather corals do require supplemental feedings of phytoplankton and marine snow.
Lighting & Flow Requirements: The Fiji Yellow Leather Corals requires moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Fiji Yellow Leather Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate to high (PAR 150-300)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Fiji
Family: Alcyoniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help the Fiji Yellow Leather Corals grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Firefly Echinopora Coral
$ 19.99
How to Care for Firefly Echinopora Coral
written by Dave Burr
The Firefly Echinopora will bring a burst of color to any reef aquarium as it encrusts over the rock. When placed on an exposed rock or ledge this coral may plate out as well as encrust the rock.
Tentacles: Echinopora Corals have sweeper tentacles that come out at night so leave several inches between them and surrounding corals.
Placement: Mount the Firefly Echinopora using IC gel glue, or putty, on an exposed rock in the lower half of the aquarium where it will receive moderate flow and indirect light. Keep in mind that it may plate out as it grows shading nearby corals.
Feeding: Vivid Aquariums recommends feeding Echinopora Corals with Oyster-Feast, Roti-Feast, and/or cyclopeeze. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Firefly Echinopora requires moderate water flow and low to moderate lighting (PAR 80-250) to maintain its color. T5's, Metal Halides, or LED's can all grow Echinopora Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo Pacific, Grown in California
Family: Pectiniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Fluorescent Green Star Polyps
$ 19.99
How to Care for Fluorescent Green Star Polyps
written by Dave Burr
Fluorescent Green Star Polyps are easy to keep and make a great beginners coral. They are fast growers and can grow over the live rock and even grow onto the back of the aquarium providing a beautiful backdrop for your reef tank.
Placement: Mount the Fluorescent Green Star Polyps using IC gel glue, or putty, on an exposed rock in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Star Polyp island by mounting them to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, Green Star Polyps do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements:
Fluorescent Green Star Polyps require moderate water flow and moderate lighting (PAR 130-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Green Star Polyps when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 130-250)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Briareidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Fluorescent Tip Torch Coral
Sold Out - $ 69.99
How to Care for Fluorescent Tip Torch Coral
written by Dave Burr
Fluorescent Tip Torch Coral is a great beginner coral and will sway back and forth to the currents in the aquarium. Torch Corals are a favorite of many because of the sense of motion they bring to a reef tank.
Tentacles: They do have sweeper tentacles that can extend 2"- 4" at night and sting nearby corals. Fluorescent Tip Torch Corals may be placed next to other Euphyllia species such as Frogspawn Coral and Hammer Coral as they do not sting other Euphyllia Corals.
Placement: Mount the Fluorescent Tip Torch Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mysis shrimp.
Lighting & Flow Requirements:
The Fluorescent Tip Torch Coral requires moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Torch Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Fiji, Indo Pacific, Australia, Solomon Islands
Family: Caryophyllidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Forest Fire Mushroom
$ 79.99 $ 99.99
How to Care for Forest Fire Mushroom Coral
written by Dave Burr
The Forest Fire Mushroom is easy to keep for beginners. These beauties will stand out in any reef aquarium.
Placement: Mount the Forest Fire Mushrooms using IC gel glue, or putty, in the bottom half of the aquarium where they can reproduce and expand their colonies over the rock. If you do not want them growing on your your main rock structure try creating a mushroom island by mounting several types of mushrooms to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of phytoplankton, zooplankton, and/or marine snow.
Lighting & Flow Requirements: Forest Fire Mushrooms require low to moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Psychedelic Mushrooms when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Low to moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Actinodiscidae / Discosomatidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help Psychedelic Mushrooms grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Fox Coral
$ 69.99
How to Care for Fox Coral
written by Dave Burr
The Fox Coral is easy to keep and makes a great beginner coral. Its unique shape is sure to stand out.
Placement: Mount the Fox Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower half of the aquarium where they will receive low to moderate currents and moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis Fox Corals do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mysis shrimp.
Lighting & Flow Requirements:
The Fox Coral requires low to moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Fox Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Low to moderate
Aggressiveness: Peaceful
Range: Fiji, Tonga, Indo Pacific
Family: Caryophylliidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Fruit Loop Zoanthid coral
Sold Out - $ 29.99
How to Care Fruit Loop Zoanthids
written by Dave Burr
Fruit Loop Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Fruit Loop Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, Eagle Eye Zoanthids do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Fruit Loop Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palyhtoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Gobstopper Zoanthid Coral
Sold Out - $ 29.99
How to Care for Gobstopper Zoanthids
written by Dave Burr
Gobstopper Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Gobstopper Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Gobstopper Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Golden Leptastrea Coral
$ 39.99
How to Care for Golden Leptastrea Coral
written by Dave Burr
Gold is an uncommon color for corals, thus the Golden Leptastrea will stand out in any reef aquarium. It is easy to keep and will encrust over the rocks as it grows.
Placement: Mount the Golden Leptastrea using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Golden Leptastrea requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Goldeneye Echinophyllia Coral
$ 44.99
How to Care for Goldeneye Echinophyllia Coral
The Goldeneye Echinophyllia will bring a good contrast to any reef aquarium as it encrusts over the rock.
Placement: Mount the Goldeneye Echinophyllia using IC gel glue, or putty, on an exposed rock in the lower half of the aquarium where it will receive moderate flow and indirect light.
Feeding: Vivid Aquariums recommends feeding Echinophyllia and Chalice Corals with Oyster-Feast, Roti-Feast, and/or cyclopeeze. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Tentacles: Echinophyllia & Chalice Corals have sweeper tentacles that come out at night so leave several inches between them and surrounding corals.
Lighting & Flow Requirements:
The Goldeneye Echinophyllia requires moderate water flow and low to moderate lighting (PAR 80-250) to maintain its color. T5's, Metal Halides, or LED's can all grow Echinophyllia & Chalice Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo Pacific, Grown in California
Family: Pectiniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Grandis Palythoa
$ 19.99 $ 24.99
How to Care for Grandis Palythoa
written by Dave Burr
Grandis Palythoa Palys are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Grandis Palythoa using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Grandis Palythoa require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green & White Pipe Organ Coral
$ 49.99
How to Care for Green & White Pipe Organ Coral
written by Dave Burr
Although Green & White Pipe Organ Coral does have a red skeleton it is actually classified as a soft coral. It is often confused with Star Polyps. Unlike Star Polyps, it will not encrust the rocks and crowd out other coral species. It is a good coral to use to fill in gaps between other peaceful corals as it will not sting.
Placement: Mount the Green & White Pipe Organ using IC gel glue, or putty, on an exposed rock or ledge in the middle third of the aquarium where they will receive moderate currents and moderate to high lighting. Leave a few inches around them and consider that they will often begin to shade corals around them as they grow larger.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do require supplemental feedings of phytoplankton, zooplankton, and marine snow.
Lighting & Flow Requirements: The Green & White Pipe Organ Leather requires moderate water flow and low to moderate lighting (PAR 200-300). T5's, Metal Halides, or LED's can all grow Pipe Organ Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Moderate to high (PAR 200-300)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Fiji, Indo Pacific
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help the Green & White Pipe Organ grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Video
Green Apple Cap Montipora Coral
$ 49.99
How to Care for Green Apple Cap Montipora Coral
written by Dave Burr
Aquaculture: Think of frags as montipora seeds. Fragments of montipora are mounted onto small stones and grown in aquariums. We grow and frag Green Apple Cap coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Green Apple Cap using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember that as it grows and plates out it will create more and more shade below it.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Green Apple Cap requires moderate to high water flow and bright lighting (PAR 250-400) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy - great beginner SPS coral!
Lighting Requirements: Moderate to high (PAR 250-400)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora capricornus
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Bay Packer Zoanthids
$ 19.99
How to Care for Green Bay Packer Zoanthids
written by Dave Burr
Green Bay Packer Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Green Bay Packer Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Green Bay Packer Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Bubble Coral
Sold Out - $ 229.99
How to Care for Green Bubble Coral
written by Dave Burr
The Green Bubble Coral is easy to keep and makes a great beginner coral. Its unique shape is sure to stand out.
Placement: Mount the Green Bubble Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower half of the aquarium where they will receive low to moderate currents and moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mysis shrimp.
Lighting & Flow Requirements:
The Green Bubble Coral requires low to moderate water flow and moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Bubble Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Low to moderate
Aggressiveness: Peaceful
Range: Fiji, Tonga, Indo Pacific, Australia
Family: Euphylidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Video
Green Bullseye Mushrooms
$ 39.99 $ 49.99
How to Care for Green Bullseye Mushrooms
written by Dave Burr
Green Bullseye Mushrooms are a classic beginner coral but will stand out in the nicest of reef tanks. They will grow well in most reef aquariums.
Placement: Mount the Green Bullseye Mushrooms using IC gel glue, or putty, in the bottom half of the aquarium where they can reproduce and expand their colonies over the rock. If you do not want them growing on your your main rock structure try creating a mushroom island by mounting several types of mushrooms to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of phytoplankton, zooplankton, and/or marine snow.
Lighting & Flow Requirements: Green Bullseye Mushrooms require low to moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Purple Bullseye Mushrooms when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Low to moderate
Aggressiveness: Semi-aggressive
Range: Fiji, Tonga
Family: Discosomatidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help Purple Bullseye Mushrooms grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Candy Cane Coral
$ 19.99
How to Care for Green Candy Cane Coral
written by Dave Burr
Green Candy Cane Coral is easy to keep, making it a great choice for beginners. This intense neon green variation provides a beautiful contrast to other corals in the aquarium. It is easy to frag as it grows out giving you the ability add spots of color throughout your reef.
Placement: Mount the Green Candy Cane coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis Kryptonite Candy Cane corals do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, or small mysis shrimp.
Lighting & Flow Requirements: Green Candy Cane Coral requires moderate water flow and low to moderate lighting (PAR 150-250). T5's, Metal Halides, or LED's can all grow Candy Cane Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Indo Pacific, Fiji
Family: Faviidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Duncan Coral
$ 19.99 $ 29.99
How to Care for Green Duncan Coral
written by Dave Burr
Green Duncan Corals are easy to keep and grow well in most reef aquariums. They are a great choice for adding a splash of color to lower flow, lower light areas of your reef aquarium.
Placement: Mount the Duncan Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive low to moderate currents and low to moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Green Duncan Coral requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Leather Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 120-250)
Water Flow: Low to moderate
Aggressiveness: Peaceful
Range: Australia
Family: Dendrophylidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Flash Zoanthid Coral
$ 9.99 $ 19.99
How to Care for Green Flash Zoanthids
written by Dave Burr
Green Flash Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Green Flash Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Green Flash Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Goblin Anacropora Coral
$ 39.99
How to Care for Green Goblin Anacropora Coral
written by Dave Burr
Think of frags as Anacropora seeds. Fragments of anacropora are mounted onto small stones and grown in aquariums. We grow and frag the Green Goblin Anacropora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Green Goblin Anacropora coral using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Green Goblin Anacropora coral coral requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Acroporidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Hydnophora Coral
$ 24.99
How to Care for Green Hydnophora Coral
written by Dave Burr
Placement: Mount the Green Hydnophora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Leave 2-3 inches between it and other corals as it has a potent sting.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Green Hydnophora requires moderate to high water flow and bright lighting (PAR 250-350) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 250-350)
Water Flow: Moderate to high
Aggressiveness: Aggressive - leave 2-3 inches between it and other corals
Range: Indo-Pacific
Family: Merulinidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Leptastrea Coral
$ 29.99
How to Care for Green Leptastrea Coral
written by Dave Burr
Placement: Mount the Green Leptastrea using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Green Leptastrea requires moderate water flow and low to moderate lighting (PAR 120-250). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Leptoseris Coral
$ 44.99
How to Care for Green Leptoseris Coral
written by Dave Burr
Placement: Mount the Green Leptoseris Coral using IC gel glue, or putty, on an exposed rock in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave space for this coral to grow and encrust the rocks around it.
Feeding: Although symbiotic algae called zooxanthellae hosted within the Jack-O-Lantern Leptoseris Coral supply most of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, mysis shrimp, or finely chopped meaty foods.
Lighting & Flow Requirements: The Green Leptoseris Coral requires moderate water flow and low to moderate lighting (PAR 120-220). T5's, Metal Halides, or LED's can all grow Leptastrea Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low - Moderate (PAR 120-220)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Faviidae
Water Conditions: 74-80 F; sg 1.023-1.025; pH 8.1-8.4; dKH 8-12
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Long Tentacle Plate Coral
Sold Out - $ 149.99
How to Care for Green Long Tentacle Plate Coral
written by Dave Burr
The Green Long Tentacle Plate Coral will sway nicely in the currents and will bring a splash or color to the sand bed of any reef aquarium. They remind many hobbyists of Anemones.
Placement: Place the Green Long Tentacle Plate Coral on the sand bed where they will receive low to moderate currents and low to moderate lighting.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings once or twice per week. Offer Oyster Feast, mysis shrimp, and other chopped meaty foods when their tentacles are extended.
Lighting & Flow Requirements: The Green Long Tentacle Plate Coral requires low water flow and low to moderate lighting (PAR 100-220). T5's, Metal Halides, or LED's can all grow Heliofungia Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Moderate
Lighting Requirements: Moderate (PAR 180-280)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo Pacific, Australia
Family: Fungiidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Monster Bounce Mushroom Coral
$ 89.99
How to Care for Green Monster Bounce Mushroom Coral
written by Dave Burr
The Green Monster Bounce Mushroom is easy to keep for beginners. These beauties will stand out in any reef aquarium.
Placement: Mount the Green Monster Bounce Mushrooms using IC gel glue, or putty, in the bottom half of the aquarium where they can reproduce and expand their colonies over the rock. If you do not want them growing on your your main rock structure try creating a mushroom island by mounting several types of mushrooms to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of phytoplankton, zooplankton, and/or marine snow.
Lighting & Flow Requirements: Green Monster Bounce Mushrooms require low to moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Psychedelic Mushrooms when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Low to moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Actinodiscidae / Discosomatidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help Psychedelic Mushrooms grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Montipora Capricornus Coral
Sold Out - $ 19.99
How to Care for Green Montipora Capricornus Coral
written by Dave Burr
Aquaculture: Think of frags as montipora seeds. Fragments of montipora are mounted onto small stones and grown in aquariums. We grow and frag Green Encrusting Montipora coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Green Montipora Capricornus using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember that as it grows and plates out it will create more and more shade below it.
Feeding: Vivid Aquariums recommends feeding montipora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Green Montipora Capricornus requires moderate to high water flow and bright lighting (PAR 250-400) to maintain its color. T5's, Metal Halides, or LED's can all grow Montipora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy - great beginner SPS coral!
Lighting Requirements: Moderate to high (PAR 250-400)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora Capricornus
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Montipora Digitata Coral
Sold Out - $ 34.99
How to Care for Green Montipora Digitata Coral
written by Dave Burr
Aquaculture: We grow and frag the Green Montipora Digitata coral here at Vivid Aquariums. We believe that frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Green Montipora Digitata using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Montipora Digitata will encrust the rock and grow beautiful branched colonies.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Green Montipora Digitata requires moderate to high water flow and moderate to bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Lighting Requirements: Moderate to high (PAR 300-450)
Water Flow: Moderate to high
Aggressiveness: Peaceful
Range: Indo-Pacific, Grown in California
Family: Montipora digitata
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Polyp Toadstool Leather Coral
Sold Out - $ 39.99
How to Care for Green Polyp Toadstool Leather Coral
written by Dave Burr
Aquaculture: We farm Green Polyp Toadstool Leather Corals here at Vivid Aquariums by cutting off a piece of the parent's crown and attaching it to a frag plug with string or glue. Smaller specimens are shaped like a mushroom, however as they grow larger they will take on an interesting folded appearance. When fully open the tops of these leather corals are covered with numerous green polyps about 1 cm in length.
Shedding: As with most leather corals they may go through periods when their polyps do not extend. They may shrink and shed some of their outer skin. Do not be alarmed if this should occur as it is a natural process that they go through. These leathers may remain closed for several days at a time but will reopen bigger and more beautiful than ever.
Placement: Mount the Green Polyp Toadstool Leather Coral using IC gel glue, or putty, on an exposed rock or ledge in the middle third of the aquarium where they will receive moderate currents and moderate to high lighting. Leave a few inches around them and consider that they will often begin to shade corals around them as they grow larger.
Feeding:
Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do require supplemental feedings of phytoplankton and marine snow.
Lighting & Flow Requirements: The Green Polyp Toadstool Leather requires moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Leather Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate to high (PAR 150-300)
Water Flow: Moderate
Aggressiveness: Peaceful
Range: Australia, Grown in California
Family: Alcyoniidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help the Green Polyp Toadstool Leather grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Ricordea Mushrooms
$ 29.99
How to Care for Green Ricordea Mushrooms
written by Dave Burr
Green Ricordea Mushrooms are a great beginners coral and will glow beautifully under actinic lighting. They are sure to stand out in any reef aquarium.
Placement: Mount the Green Ricordea Mushrooms using IC gel glue, or putty, in the bottom half of the aquarium where they can reproduce and expand their colonies over the rock. If you do not want them growing on your your main rock structure try creating a mushroom island by mounting several types of mushrooms to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of phytoplankton, zooplankton, and/or marine snow.
Lighting & Flow Requirements: Green Ricordea Mushrooms require low to moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Green Ricordea Mushrooms when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Low to moderate
Aggressiveness: Semi-aggressive
Range: Caribbean
Family: Ricordeidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help Ricordea Mushrooms grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Striped Mushroom
Sold Out - $ 37.99
How to Care for Green Striped Mushrooms
written by Dave Burr
Green Striped Mushrooms are a classic beginner coral and are easy to keep.
Placement: Mount the Green Striped Mushrooms using IC gel glue, or putty, in the bottom half of the aquarium where they can reproduce and expand their colonies over the rock. If you do not want them growing on your your main rock structure try creating a mushroom island by mounting several types of mushrooms to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of phytoplankton, zooplankton, and/or marine snow.
Lighting & Flow Requirements: Green Striped Mushrooms require low to moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Green Striped Mushrooms when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Low to moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Actinodiscidae / Discosomatidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help Green Striped Mushrooms grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Stylophora Coral
$ 34.99
How to Care for Green Stylophora Coral
written by Dave Burr
Think of frags as seeds. Fragments of Green Stylophora are mounted onto small stones and grown in aquariums. We grow and frag the Pink Stylophora here at Vivid Aquariums. We believe that Frags and aqua-cultured corals are the future of the aquarium hobby.
Placement: Mount the Green Stylophora using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light.
Feeding: Vivid Aquariums recommends feeding acropora corals with Oyster-Feast and/or Roti-Feast. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: The Green Stylophora requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow Birdsnest Coral when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy in SPS tank!
Water Flow: High
Aggressiveness: Peaceful
Range: Indo-Pacific
Family: Seriatopora sp.
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Green Tip Cristata Torch Coral
$ 59.99 $ 49.99
How to Care for Cristata Torch Coral
written by Dave Burr
Cristata Coral is a great beginner coral and will sway back and forth to the currents in the aquarium. Torch Corals are a favorite of many because of the sense of motion they bring to a reef tank.
Tentacles: Cristata Torch Corals do have sweeper tentacles that can extend 1/2"- 1" at night and can nearby corals. Cristata Torch Corals should be placed away from other Euphyllia species such as Frogspawn Coral and Hammer Coral as they could sting other Euphyllia Corals.
Placement: Mount the Cristata Torch Coral using IC gel glue, or putty, on an exposed rock or ledge in the lower two- thirds of the aquarium where they will receive moderate currents and low to moderate lighting. Leave 2-3" around this coral as it has tentacles that can sting nearby corals at night.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, and mysis shrimp.
Lighting & Flow Requirements: The Cristata Torch Coral requires low to moderate water flow and low to moderate lighting (PAR 80 - 150). T5's, Metal Halides, or LED's can all grow Torch Corals when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Moderate (PAR 150-250)
Water Flow: Moderate
Aggressiveness: Aggressive
Range: Fiji, Indo Pacific, Australia, Solomon Islands
Family: Caryophyllidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Hairy Mushrooms
$ 49.99
How to Care for Hairy Mushrooms
written by Dave Burr
Hairy Mushrooms can grow to 3" in diameter. They grow very densely, often covering the rock completely. These mushrooms will grow and reproduce by fission in the aquarium when provided with the proper environment.
Placement: Mount the Hairy Mushrooms using IC gel glue, or putty, in the bottom half of the aquarium where they can reproduce and expand their colonies over the rock. If you do not want them growing on your your main rock structure try creating a mushroom island by mounting several types of mushrooms to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply some of their nutritional requirements through photosynthesis they do benefit from supplemental feedings of phytoplankton, zooplankton, and/or marine snow.
Lighting & Flow Requirements: Hairy Mushrooms require low to moderate water flow and low to moderate lighting (PAR 80-250). T5's, Metal Halides, or LED's can all grow Hairy Mushrooms when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 80-250)
Water Flow: Low to moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Discosomatidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: Providing additions of iodine will help Hairy Mushrooms grow. Most good salt mixes will provide enough iodine through water changes. It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Halle Berry Zoanthid Coral
$ 39.99
How to Care for Halle Berry Zoanthid Coral
written by Dave Burr
Halle Berry Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Halle Berry Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Halle Berry Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palythoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific, Grown in California
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
Hawaiian Tropic Zoanthids
$ 19.99
How to Care for Hawaiian Tropic Zoanthids
written by Dave Burr
Hawaiian Tropic Zoanthids are easy to keep and are a great choice for the beginner. Zoanthids and Palythoa will grow and reproduce by budding.
Placement: Mount the Hawaiian Tropic Zoanthids using IC gel glue, or putty, on an exposed rock lower in the aquarium where they will receive direct flow and light. If you do not want them growing on your your main rock structure, try creating a Zoanthid island by mounting several types of Zoanthids and Palythoa to one larger rock and placing it as an island in your sand bed.
Feeding: Although symbiotic algae called zooxanthellae hosted within them supply most of their nutritional requirements through photosynthesis, they do benefit from supplemental feedings of Oyster-Feast, Roti-Feast, cyclopeeze, & sometimes small bits of mini mysis. Target feeding gets the corals fed using less food while keeping your nitrates and phosphates lower.
Lighting & Flow Requirements: Hawaiian Tropic Zoanthids require moderate water flow and low to moderate lighting (PAR 100-250) to maintain their color. T5's, Metal Halides, or LED's can all grow Zoanthids and Palyhtoa when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.
Care Level: Easy
Lighting Requirements: Low to moderate (PAR 100-250)
Water Flow: Moderate
Aggressiveness: Semi-aggressive
Range: Indo-Pacific
Family: Zoanthidae
Water Conditions: 75-80° F; sg 1.024-1.026 (1.025 is ideal); pH 8.1-8.4 Ca 420-440 ppm, Alk 8-9.5 dKH, Mg 1260-1350, Nitrates <10ppm, Phosphates, < .10ppm
Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Dosing: Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.